1-1
SECTION 1
General Description
••••••••••••••••••••••••••••••••••••••••••••••••••
About the VISTA-50P/VISTA-50PUL
The VISTA-50P/VISTA-50PUL is an 8-partition, UL Listed control panel with the following features:
• Supports hardwired, polling loop, and wireless zones
• Supervision of bells and RF receivers
• Scheduling capabilities (allows certain operations to be automated)
Features
Hardwire and Optional Expansion Zones
• Provides 9 hardwire zones.
• Supports up to 16 2-wire smoke detectors on zone 1.
• Triggers the built-in sounders on other hardwired smoke detectors if one smoke detector annunciates an alarm. This
feature requires a 4204 Relay Module and/or the 333PRM.
• Supports up to 50 2-wire latching glassbreak detectors on zone 8.
• Supports up to 77 additional expansion zones using a built-in polling (multiplex) loop.
• Supports up to 86 wireless zones (fewer if using hardwire and/or polling loop zones).
U
L
The 5881ENHC RF Receiver and the 5869 Holdup Switch Transmitter are listed for UL Commercial Burglary
applications. All other RF receivers and transmitters are not listed for UL Commercial Burglary applications.
• Provides three keypad panic keys: 1 + ✴ (A), ✴ + # (B), and 3 + # (C).
Peripherals Devices
• Supports up to 16 addressable devices, (keypads, RF receivers, relay modules, etc.).
• Provides 16 outputs using 4204 and X-10 devices. The system can activate outputs in response to system events
(alarm condition), at a specific time of day, and manually using the #70 Relay Command Mode.
• Supports the 4285/4286 VIP Module, which allows access to the system from either a remote location or on the
premises
U
L
The VIP Module is not Listed for use with the VISTA-50P/VISTA-50PUL Control Panel in a UL installation.
• Supports the 4146 Keyswitch on any one of the system's 8 partitions.
Arming/Disarming and Bypassing
• Provides global arming capability (ability to arm all partitions the user code has access to in one command).
• Supports Exit Error Logic, whereby the system can tell the difference between a regular alarm and an alarm caused
by leaving an entry/exit door open. If the system is not subsequently disarmed, faulted E/E zone(s) and/or interior
zones are bypassed and the system arms.
• Supports Recent Close report, which is designed to notify the central station that an alarm has occurred within 2
minutes after the exit delay has expired.
Commentaires sur ces manuels