ADEMCO VISTA-250FBP Guide d'installation télécharger pdf (Page 32)

VISTA-128FBP/VISTA-250FBP Installation and Setup Guide

3-10

power is lost.

Zone 974 (Primary Dialer Supervision) must be enabled in order for the backup dialer (or communications

device, if used) to communicate in the event that the primary dialer fails.

If a communications device is used as the primary dialer, then its supervisory zone must be enabled (e.g. 8XX,

where XX is the device address of the communications device.

The telephone line inputs have overvoltage protection in accordance with UL1459.

Reporting Formats

The system is shipped defaulted for Contact ID format. It is the only format capable of uniquely reporting all 250

zones, as well as openings and closings for all 250 users. This requires central stations to be equipped with the

MX8000 receiver. If you need to update your MX8000 receiver, contact your distributor.

The system supports ADEMCO Low Speed 3+1; 4+1; 4+2; Sescoa/Radionics 3+1; 4+1; 4+2; ADEMCO 4+2 Express;

ADEMCO High Speed; ADEMCO Contact ID Formats.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 135 136

Pas de commentaire

ADEMCO VISTA-250FBP Guide d'installation Page 32