ADEMCO LYNXR24 Guide d'installation télécharger pdf (Page 14)

- 14 -

*81 ZONE LISTS

Use this mode to define zone lists for Powerline Carrier Devices and/or for the chime by zone feature. Press *81

while in programming mode.

Note:

Entering a number other than the one specified may give unpredictable results.

 -

ZONE LIST PROGRAMMING

0 = Exit mode, upon which this prompt blinks.

1 = Enter mode

% -

ZONE LIST NUMBER

Enter the 2-digit zone list number (01-03) to be programmed (use zone list 03 for chime by zone feature).

[*] = Continue

00 = Exit mode (displays blinking 81; enter * + desired data field or menu mode number)



ZONE ENTRY TO LIST

Enter the 2-digit zone number (

) to be added to this zone list. The system will announce the Voice

Descriptor for the selected zone, if it is programmed.

[*] = Accept zone number and enter the next zone number

00 = Accept zone number and continue to next prompt

'

DELETE ENTIRE ZONE LIST?

0 = Don’t delete; continue to next prompt

1 = Delete the current zone list



DELETE SPECIFIC ZONES FROM LIST?

0 = Don’t delete; continue to next zone list number (prompt A 01)

1 = Continue to delete zones prompt

)

DELETE ZONES

Enter the 2-digit zone number to be deleted from the current zone list. When deleting a zone(s) from the

zone list, if the selected zone has a Voice Descriptor programmed, upon deletion it will be announced as

a confirmation that it has been deleted.

[*] = Delete zone and enter next zone to be deleted

00 = Return to next zone list number (prompt A 01)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Pas de commentaire

ADEMCO LYNXR24 Guide d'installation Page 14