- 12 -
*
DELETE ZONE PARAMETERS
0 = Discard the delete request.
1 = Confirm the requested delete.
If 00 is entered in the zone type, confirmation of the delete request will delete all information associated
with zone currently being programmed.
If 0 is entered in the loop number, confirmation of the delete request will delete the serial number
associated with zone currently being programmed.
Note:
00 was entered as a zone type in prompt (b), 00 will be retained and system will advance to prompt (1C).
-% 0'
ENROLL MODE
0 = Skip to the VOICE DESCRIPTOR prompt (1C). If zone type is “00,” then skips to DELETE SERIAL
NUMBER prompt instead.
1 = Enroll now and proceed to SERIAL NUMBER prompt (1b) (If “L” is not displayed).
2 = Copy the last serial number from the local memory buffer (If “L” is not displayed).
3 = View existing serial number. (Only if “L” is displayed).
9 = Delete existing serial number. (Only if “L” is displayed).
[*] = Advance to the VOICE DESCRIPTOR prompt (1C). This will save all zone parameters.
[#] = Return to the loop number prompt (E).
Notes:
(1) “L” will be displayed only if transmitter was already learned.
(2)
The system will announce the Voice Descriptor for the selected zone, if it is programmed, followed by
three beeps and “C” will be displayed only after confirmation.
-
b
SERIAL NUMBER
Manually enter the transmitter’s 7-digit serial number (printed on the transmitter). If an incorrect digit is
entered, press the [#] key to return to prompt (1A).
Note:
In order for all parameters to be accepted, you must advance to prompt (1C).
When all 7 digits are entered, press the [*] key. The serial number will be copied into EEROM and the
local memory buffer and the system will return to the (1A) prompt and “L” will be displayed. If 52 seconds
pass and no entry is been made, the system will return to prompt (1A).
-'
VOICE DESCRIPTOR
0 = Skip to next zone (A)
1 = Enter descriptor mode (existing zone descriptor will be announced, then descriptor 1 will be repeated)
-
d
vi
DESCRIPTOR 1
Enter [#] + 2-digit vocabulary index
†
number (
vi
) of first descriptor word for this zone.
To change the entered index number, press [#] + desired index number.
6 = accept word and advance to descriptor 2 (descriptor 2 will be announced)
8 = accept word and advance to next zone (prompt A) – zone descriptor will be announced
Press any other key to repeat the selected word
-)
vi
DESCRIPTOR 2
Enter [#] + 2-digit vocabulary index
†
number (
vi
) of second descriptor word for this zone.
To change the entered index number, press [#] + desired index number.
6 = accept word and advance to descriptor 3 (descriptor 3 will be announced)
8 = accept word and advance to next zone (prompt A) – zone descriptor will be announced
Press any other key to repeat the selected word
-*
vi
DESCRIPTOR 3
Enter [#] + 2-digit vocabulary index
†
number (
vi
) of third descriptor word for this zone.
To change the entered index number, press [#] + desired index number.
6 or 8 = accept word and advance to next zone (prompt A) – zone descriptor will be announced
Press any other key to repeat the selected word
†
See *84 ASSIGN ZONE VOICE DESCRIPTORS section for Vocabulary Index.
(11 pages)
(16 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels