ADEMCO Vista Guide de l'utilisateur télécharger pdf (Page 25)

– 25 –

USING DEVICE COMMANDS

General

Information

Your system may be set up so that certain lights or other devices can be turned on or

off by using the device command from the keypad. Ask your installer if this has been

done in your system. If programmed for your system, some devices may activate

automatically upon certain system conditions. In this case, the following commands

can be used to override the device activation. See your installer for a full explanation of

this feature.

To activate devices

ENTER SECURITY CODE THEN PRESS # + 7 + DEVICE NUMBER

+ # + 7 +

(Security Code) (Device Number)

Example:

7 2 9 6 then press #, then press 7, then enter the number representing the

device you wish to activate. See your installer for device numbers assigned for your system.

To deactivate

devices

ENTER SECURITY CODE THEN PRESS # + 8 + DEVICE NUMBER

+ # + 8 +

(Security Code) (Device Number)

Example:

7 2 9 6 then press #, then press 8, then enter the number representing the

device you wish to deactivate. See your installer for device numbers assigned for your system.

Device Description Device Description

1 5

2 6

3 7

4 8

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Pas de commentaire

ADEMCO Vista Guide de l'utilisateur Page 25