ADEMCO Vista-128FB Manuel d'utilisateur télécharger pdf (Page 13)

–

Partition-Specific Fields

(Duplicate this page for each partition in the installation.)

To program these fields,

1. Press *91 to select a partition.

2. Enter a partition-specific field number (ex. *09).

3. Make the required entry.

4. Repeat steps 1-3 for each partition in the system.

PARTITION #____ PROGRAM FIELDS

1st Page Fields

*09

ENTRY DELAY #1 [02]

00-15 times 15 seconds. Maximum 03 for UL Listed

installations.

*10

EXIT DELAY #1 [03]

00-15 times 15 seconds. Maximum 04 for UL Listed

installations.

*11

ENTRY DELAY #2 [06]

00-15 times 15 seconds. Maximum 03 for UL Commercial

Burglary installations.

*12

EXIT DELAY #2 [08]

00-15 times 15 seconds. Maximum 04 for UL Commercial

Burglary installations.

*13

BELL 1 TIMEOUT [04]

01-15 times 2 minutes. Minimum 16 minutes for UL.

Commercial Burglary and 6 minutes for Commercial Fire

installations.

*16

CONFIRMATION OF ARMING DING [0]

1=enable; 0=disable. Must be "1" for UL Commercial

Burglary installations.

*22

KEYPAD PANIC ENABLES [001]

1=enable; 0=disable

995 996 999

*23

MULTIPLE ALARMS [1]

1=yes; 0=no. Enter 1 for Commercial Fire & UL Commercial

Burglary installations.

*29

QUICK ARM [1]

1=yes; 0=no

*32

PRIM. SUBS. ACCT #

| | | |

Enter 00-09; B-F (11-15) [15 15 15 15]

*38

PREVENT ZONE XXX BYPASS [000]

| |

001-128; 000 if all zones can be bypassed

*39

ENABLE OPEN/CLOSE REPORT [1]

FOR INSTALLER CODE

1=enable; 0=disable

*84

SWINGER SUPPRESSION [03]

01-15 alarms; Must be "00" (disabled) for Commercial Fire &

UL installations..

*85

ENABLE DIALER REPORTS[0]

FOR PANICS & DURESS

995 996 999 Duress

1=enable; 0=disable

*87

ENTRY WARNING [0]

1=continuous; 0=3 beeps

*88

BURG. ALARM COMM. DELAY [0]

1=16 seconds; 0=no delay. Must be "0" for UL Commercial

Burglary installations.

*90

SEC. SUBS. ACCT #

| | | |

Enter 00-09; B-F (11-15) [15 15 15 15]

1*18

AFFECTS LOBBY [0]

Enter 1 if this partition affects the common lobby; enter 0 if it

does not.

1*19

ARMS LOBBY [0]

Enter 1 if arming this partition attempts to arm lobby; enter 0

if it does not

2nd Page Fields

1*26

PANIC BUTTON OR SPEEDKEY

[00, 00, 00, 00]

A B C D

Enter speedkey macro # (01-35) to use keys A-C for macro.

Otherwise enter 00 to use as panic. For D key, enter macro

# or 00 to select macro when key is pressed.

1*43

PERM. KEYPAD BACKLIGHT [0]

1=enable; 0=disable When disabled, display lights when

any key is pressed, and turns off after period of keypad

inactivity.

1*45

EXIT DELAY SOUNDING [0]

1=enable; 0=disable Produces quick beeping during exit

delay if enabled.

1*47

CHIME ON BELL 1 [0]

1=enable; 0=disable

1*52

SEND CANCEL IF ALARM + OFF [0]

1=no restriction; 0=within Bell Timeout period only

1*76

ACCESS CONTROL RELAY FOR PART.[00]

Relay will be pulsed for 2 seconds whenever code + [0] is

pressed. Enter 00-16; 00=none. Must be "00" for

Commercial Fire & UL.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

ADEMCO Vista-128FB Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité ADEMCO Vista-128FB