ADEMCO 4160-12 C-COM Spécifications télécharger pdf (Page 36)

ImhllAlIoa AUJ YIRI116

IlBTAuAlIon AeD YIwl6, No. 1160-12 cc&

Do not connect th, battery or pl+in transformer uatll~all other wirhg

ksbeen~leted:

Use of tuisted wlrirg Is recamended for all runs,

for greater immunity to unwanted induced voltages.

A. TENMItuLs: (See Diagram 9)

TBl

Systa

Arming Status Output:

This terminal provides an

output that can be used to control space protection devices

such as those in the 760 series (Ultrasonic) and 650 series

(Passive Infrared).

See the individual instructions accom-

panying these devices.

It may

also be used to control the arming of Wenco's Eb. 1036/

1038

Contact Identification Annunciator. See the individual

instructions accompanying

the

CIA.

The polarity of this output is settable in PROM (LO = ARM,

DISARM

or HI = ARM, LOW = DISARM)

Red LED Uutput (LO =

ARM):

This output provides system

arming status data to the Red LED on remote Keyswitch arming

stations (e.g. Fbs. .9787, 9789). A steady output is produced

to indicate that the systen is aned either "AHAY" or "STAY"

and a flashing output is produced as a memory of alarm

indicator.

Up to four Key arming stations can be supported

(30 MA MAX.)

NDt

used

circuit

could (0) Return

Loop

Status

(ktput

(HI - READY): This output provides

zone status data to the Green LED on remote Keyswitch arming

stations (e.g. tbs. 9787; 9789). A steady output is produced

to indicate that all zones are intact. Up to four Key

arming stations can be supported (30 MA MAX.)

Circuit Gromd (0) Return

8, 9, 10

Wet

Used

Test nOde Select Input (LO = ON): When this terminal is

connected to circuit ground (e:g. TEl-7), a test call to

the central station is initiated with the Test Code as

the.report (independent of whether the system is armed

713628-36

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 58 59

Commentaires sur ces manuels

Pas de commentaire

ADEMCO 4160-12 C-COM Spécifications Page 36

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité ADEMCO 4160-12 C-COM