ADEMCO 4160-12 C-COM Spécifications télécharger pdf (Page 13)

Audible Signals

Fire Alarm: Interrupted, rapidly alternating two-tone sound

accompanied by lighting of

FIRE LEO.

Burqlary/Audible Police/Emergency Alarm:

Either continuous rapidly alternating two-tone sound or

continuous slowly alternating two-tone sound (dependent

upon system programing) accompanied by lighting of BURGLRY

message, POLICE LED, or EMERGENCY LED.

System Turned DFF or Failure to Arm: Single brief tone

System Armed AWAY: Two brief tones

.System Armed STAY:

Three brief tones

Trouble:

Rapidly pulsing tones for a Zone 4 trouble or

for a loss of AC powe r beyond the programmed

time period.

Entry Warning: Slowly pulsing tones activated during the entry

delay period.

Chime Annunciation:

Single tone each time Zone

1 or 2

faulted when in this mode.

Memory of Alarm:

Rapidly pulsing tones activated during

the entry delay period subsequent to

an al arm or after disarming subsequent

to an alarm.

Key Depression Feedback: Brief buzz tone for each key not in

the dual key panic section of tk keypad.

FUNCTIONAL DESCRIPTION, ND. 5314 REMOTE KEYPAD (See Diagram 7)

1. Keypad and LEDs:

Keys O-9: These are

used

to enter the security code and the

duress digit.

OFF Key:

When depressed subsequent to entry of the security

code, silences- alarms, memory, and trouble audibles and disarms

the system.

WAY Key and LED (Red):

When depressed subsequent to entry

of the security code

, arms the entire burglary system if there

are no faulted zones.

The AWAY LED is lit when the system is

armed in this mode.

STAY Key and

LED

(Red): When depressed subsequent to entry

of the security code, arms all of the burglary zones except

for Zone 3 (Interior Protection) if there are no faulted zones

(other than Zone 3).

The STAY LED

lit when the system is

armed in this mode.

CHK.BYP LED (Yellow):

This LED lights steadily if a zone

has been shunted by either force arming or individual zone shunting.

It flashes if a trouble condition in Zone 4 has been detected.

The trouble indication overrides the shunt indication if both

,r?

,’

628-13

690

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 58 59

Commentaires sur ces manuels

Pas de commentaire

ADEMCO 4160-12 C-COM Spécifications Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité ADEMCO 4160-12 C-COM