ADEMCO 4160-12 C-COM Spécifications Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 59
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
2. LED Indicators:
ZONE LEDS FOR ZONES 1, i, 3, 4, 6 (RED):
These LEDs indicate
the status of their respective zones:
ON STEADY - Existing Zone Fault
SLOWLY FLASHING - Shunted
RAPIDLY FLASHING - Memory of Alarm
ZOE 4 TROUBLE LED (RED):
This LED indicates the trouble status
of zone 4 whether It is operating as a supervised fire zone
or as a day trouble burglary zone:
ON STEADY
- Existing Trouble
RAPIDLY FLASHING - Memory of Trouble
PDMER LED (GREEN):
This LED indicates the presence of AC power
to operate the system.
This LED will turn off Mediately when
AC power is lost.
6.
FUllCTIOWiL
lE5CRIPTION,
tlo. 4165 SXREN-DRIVER (See Magra 5)
Controls:
PITCH
ADJUSTUENT:
The small blue potentiometer permits the
adjustment of the pitch of sound produced by the siren driver.
Clockwise adjustment (as viewed from the right side of the cabinet)
increases the pitch and counterclockwise adjustment descreases
the pitch.
c.
FUICTIONN OESCRIPlION, I@. 5321 SLCURITY COKOLE (Se Magrr 6)
1.
Keypad, LEDs and Hessage Msplays:
ROTE: The interval between consecutive key depressions must
not
be greater than 2 seconds for acceptance of the
entry.
Keys O-9: These are used to enter'the security code and the
duress digit.
OFF Key and LED (6ieen) :
When depressed subsequent to entry
.of the security code, silences alarms, memory and trouble audibles
and disarms the system.
The OFF LED is lit when the system's
burglary protection'is turned off.
AYAY Key and
LED (Red):
When depressed subsequent to entry
of the security code,
arms the entire burglary system if there
are no faulted zones.
The AWAY LED is lit when the system is
anned in this mode.
STAY Key and LED (Red) :
When depressed subsequent to entry
of the security code, arms all of the burglary zones except
Zone 3 (Interior Protection) if there are no faulted zones (other
than Zone 3).
The STAY LED
is
lit when the system is armed
in thls mode.
628-10
687
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 58 59

Commentaires sur ces manuels

Pas de commentaire