EXPLANATION OF ZONE ASSIGNMENT TABLE HEADINGS
Zn = ZONE No. Zone Nos. are from 01 to 63,92, 9S, 96, 99. Some are pre-aaaigned.
With Field
●25 set for autiliary wired loops (4219, or 4229), use Zone Nos. 10-17 for lcops A-i-f.
ZT =
ZONE TYPE 00= Not Used
05 = Trouble Day/Alarm Night
10= Interior w/Delay
01 = Entry/Exit #1
06= 24 Hr Silent
23. No Alarm Response
02= Entry/Exit #2
07= 24 Hr Audible
24= Silent Burglary
03= Perimeter
08 =24 Hr Aux
04= Interior Follower
09= Fire
m
P = PARTITION No.
lor2 Default Values for zones 01-08 = [1].
RC = ALARM
REPORT CODE
Two Hex Digits.
For each Hex Di it, enter
2
00-09 for C-9, 10 for A, 11 for B,12 for C, 13 for D,
14 for E, 15 for If ’00” is entered as the first digit, mere will be no rePOt_tfor that zone.
For contact ID reporting, mis is enabling code only. Enter any hex digit (other than 00) in the first pair of
boxes. The second pair of boxes is ignored.
In=
LOOP INPUT TYPE
HW: Hard Wire
AW: Aux Wire (4219 or 4229)
RT =
RESPONSE TIME O= 10mseC 1 = 350 msec; 2 = 700 msec. Default Values for zones 01-08 = 1 (350 msec)
EXPANSION ZONES (continued from previous page )
ZONE
ZONE
DESCRIPTION
(%j
421 9/4229 Loop E,
5th
Izlzl
F 6th
m
G, 7th
m
H, 8th
IIIzl
ZONE
TYPE
(ZT)
I
I
I
6tlj_l
4
PART’N
No.
(P)
n
a
n
n
ALARM RPT CODE
INPUT
p;)
TYPE
(In)
~ ‘w
~ ‘w
~ ‘w
~ ‘w
TO PROGRAM SYSTEM STATUS, & RESTORE
REPORT CODES (*5-76, & *89):
With a 3+1 or 4+1 Standard Formak Enter a cede in the first
box: 1-9, 0, B, C, D, E, or F. Enter “#+10- for O,%+11“ for B,
“#+12°
for C, “#+13’ for D, %+14” for E, “#+15m for F.
A “O” (rrot “#+10’) in the rirstbox will disable a report.
A “O” (not “#+1 O“) in the secondbox will result in automatic
advance to the next field when programming.
With an Expanded or 4+2 Format: Enter codes in both boxes
(lst and 2nd digits) for 1-9,0, or B-F, as described above.
A “O” (not ‘#+10-) in the second box will eiiminate the ex
panded message fOr that repOtl.
A ‘O” (rrot “!4+10”) in botfr boxes will disable the report.
With Ademco
Contact ID Reporting: Enter any digit (other
than ‘O”) in
the firstbox, to enable zone to report (entries in the
second boxes will be ignored).
A “O” (not “#+1 Os)in the first box will disable the report.
Examples:
For Code 3 (single digit), entec
m
For Code 32 (two digits), entec
m
For Code B2 (Hexadecimal), entec [~~
SYSTEM STATUS REPORT CODES (*59- 68)
*59
*6O
*6 I
*62
*63
*64
*65
EXIT ERROR REPORT CODE
Ut
TROUBLE REPORT CODE
ml
BYPASS REPORT CODE
u
AC LOSS
REPORT CODE
-7 [-j
LOW BAT REPORT CODE
Y [Tl
TEST REPORT CODE
m
OPEN REPORT CODE
Part. 1
❑ tt
Part. 2 ❑ tt
t Znd digit
is automatically sent as the 2nd digit of the Zone
alarm report code programmed in *56, if expanded or 4+2
rectortina is selected.
*66 ARM AWAYLSTAY RPT CODE
Part. 1❑ ❑ tt
AWAY STAY
Part. 2m Ott
AWAY STAY
*68
CANCEL REPORT CODE
m
RESTORE REPORT CODES (*69+76)
*69
*7O
*7 I
*72
*73
*74
*76
GROUP RESTORES for TROUBLE,
•1
BYPASS: [0= no (report
for each restore)], I = yes (report
after all zones restored)
Note:’1” not applicable to Contact ID reporting.
ALARM RESTORE RPT CODE II
—
2nd digit is automatically sent as the 2nd digit of the
zone alarm report code programmed in *56, if
expanded or 4+2 reporting is selected.
TROUBLE RESTORE RPT
CODE
m
BYPASS RESTORE RPT CODE Ill
AC RESTORE RPT CODE
7 ~]
LOW BAT RESTORE RPT CODE
Tllj
TEST RESTORE RPT CODE
L-!
OUTPUT AND SYSTEM SETUP (*80+93)
*8O OUTPUT RELAYS AND
I Proaram on/y if Hekwsl
POWERLINE CARRIER
ardor Powerfine -
DEVICES
Cam’er devices are to
be used. See next two
*81
ZONE LISTS FOR OUTPUT
pages.
tt 2nd digit is automatically sent as the user number if
expanded or 4+2 reporbng is selected.
.-
v Reports with Partition 1 Subscriber No.
-4-
(128 pages)
(56 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels