ADEMCO VISTA-250FBP Guide de l'utilisateur télécharger pdf (Page 54)

– 54 –

Using #77 Instant Activation Mode (cont’d)

Additional Commands

Action Code

Action Specifier

77 Access Point Group Enable Group #

78 Access Point Group Disable Group #

To enter the Instant Activation Mode:

Enter your security code; then press the [#] key followed by 77.

ACTION ?

Enter the code for the desired action. The

action codes are the events that are to take place

when either the system exits the #77 Mode or the

scheduled time is reached, depending on the action

selected.

Press [✳] to continue.

Enter the action specifier. This defines what the

action will affect (relay, relay group, partition, zone

list, user group). The action specifier screen prompt

varies, depending on the type of action selected.

As an example, if you selected “Auto Bypass” as the

action, the action specifier prompt would be:

ZONE LIST?

ARE YOU SURE?

1 = YES 0 = NO 0

Enter 1 (YES) or 0 (NO).

Press [✳] to continue.

QUIT MENU MODE?

1 = YES 0 = NO

Enter 1 (YES) or 0 (NO).

Press [✳] to continue.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 79 80

Pas de commentaire

ADEMCO VISTA-250FBP Guide de l'utilisateur Page 54