ADEMCO Vista-10P Guide de l'utilisateur Page 18
- Page / 64
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
– 18 –
Using the Keyswitch
Using the KeyswitchUsing the Keyswitch
Using the Keyswitch
Using the Keyswitch
Using the KeyswitchUsing the Keyswitch
Using the Keyswitch
Your system may be equipped with a keyswitch for use when arming and disarming.
Red and green lights on the keyswitch plate indicate the status of your system as
follows:
Green Light: Lights when the system is disarmed and ready to be armed (no
open zones). If the system is disarmed and the green light is off, it
indicates the system is not ready (one or more zones are open).
Red Light: Lights or flashes when system is armed in AWAY or STAY mode.
See your installer for the meanings of the lit red light:
Lit Steady = system armed AWAY or
system armed STAY and exit delay has expired
Flashing = system armed STAY and exit delay timer active
Rapid flashing = an alarm has occurred (memory of alarm).
Before arming, close all perimeter doors and windows.
To arm in the AWAY mode:
Turn the key to the right for 1/2 second and
release. Keypads beep twice and the red
indicator lights or flashes.
To arm in the STAY mode:
Turn the key to the right and hold for longer
than 1 second, then release. Keypads beep three
times and the red indicator lights or flashes.
To disarm the system:
Turn the key to the right and release. The red
light turns off
GREEN RED
keyswitch-001-V1
- ADEMCO VISTA-10P 1
- ADEMCO VISTA-10PSIA 1
- IMPORTANT! 2
- About This Manual 2
- Table of Contents 3
- System Overview 5
- (Continued)(Continued) 6
- General Information 8
- About The Keypads (Continued) 9
- Functions of the Keypads 10
- ✱] key, and 11
- Entry/Exit Delays 12
- (Contin(Contin 13
- (Continued) 13
- Arming the System 15
- GREEN RED 18
- Using the [OFF] key 19
- Bypassing Protection Zones 20
- Chime Mode 22
- Chime ModeChime Mode 22
- (Master Code) 23
- Panic Keys 24
- Panic KeysPanic Keys 24
- About Macro Keys 25
- (cont.)(cont.) 26
- Using Device Commands 27
- Paging Feature 28
- Paging FeaturePaging Feature 28
- (Cont.)(Cont.) 31
- Scheduling 32
- SchedulingScheduling 32
- Scheduling (continued) 33
- Event Logging Procedures 34
- Table of Event Log Codes 35
- Testing the System 36
- Trouble Conditions 37
- Any “beeping” that 38
- Total Power Failure 39
- Maintaining Your System 40
- (zone 95) 42
- (zone 99) 42
- (zone 96) 42
- Fire Alarm System (Continued) 43
- Emergency Evacuation 44
- Fixed-Word Display Keypads 46
- Alpha Display Keypads 47
- FCC Part 68 49
- Industry Canada 49
- Industrie Canada 49
- User Setup 51
- Paging Setup 51
- List of Output Devices 51
- – NOTES – 52
- A. GENERAL INFORMATION: 53
- (cont.) 54
- LIMITATIONS OF THIS SYSTEM 55
- – Notes – 56
- ÊK0736V4jŠ 64
Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité ADEMCO Vista-10P
(112 pages)
(56 pages)
(16 pages)Seametrics WMP-Series manuali
Manuali dei proprietari e guide per l'utente per Apparecchiature Seametrics WMP-Series.
We fornisce 1 manuali pdf Seametrics WMP-Series per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Commentaires sur ces manuels