ADEMCO 5130XM Manuel d'instructions télécharger pdf (Page 67)

SYSTEM

CObfMVNXCATlONS

6 7

ADEMCO HIGH SPEED

REPORTING

ADEMCO’s

High Speed format transmits data in DTMF at a rate of 10

characters per second. The handshake frequency is 1400 Hz followed by

2300 Hz, and the kissoff frequency is 1400 Hz. The message wntains 13

digits

follows: A 4digit acwunt number + eight channels of zone

information (l-8 or duress plus 9-15) + one status channel, which identifies

the type of events being reported in the eight zone locations. A typical High

Speed report will be kissed off in under 5 sewnds.

Channels 1 through 8 mlght have one of the followlng condltlons:

l=NEWEVENT

2 = OPENING (Status Channel

Always = 2)

3 = RESTORE

4 = CLOSING (Status Channel Always = 4)

5 = NORMAL, NO EVENT TO REPORT

6 = PREVIOUSLY REPORTED, NOT YET RESTORED]

NOTE: Channel 1 will contain the user ID l-9, A-F if expanded OperrlClose

reporting is selected.

The status channel mlght have one of the followlng condltlons:

1 = DURESS (For Duress Plus Channels 9-15 Only)

2 = OPENING

3 - BYPASS (For Channels l-8 Only)

= CLOSING

5 = TROUBLE (For Channels l-8 Only)

6 = SYSTEM STATUS:

. AC LOSS in Channel 1

LOW BATTERY in Channel 2

. PROGRAM TAMPER in Channel 3

POWER ON RESET in Channel 4

7 = NORMAL AlARM STATUS (For Channels l-8 Only)

9 I TEST REPORT

A typical high speed report may look as follows:

1234 5115 5555 7 (Acct #1234 with alarms on channels 2

and 3)

To enable Ademw high speed reporting enter a 2 in field ‘46. To choose

which zones are to report, enter the channel you wish each zone to report on

(zone 1 = channel 01, etc.) in fields ‘81 - ‘64, 1’35-1’39. In fields ‘65 - ‘68.

enter

for desired reports (If 00 is entered, no report will be sent).

LIMITATIONS

When

using Ademco high speed, remember there are only 15 channels

available, plus a duress channel. If more than 15 zones are being used,

they will have to share channels.

2. With high speed reporting, channels 9-15 cannot report troubles or

bypasses. Use these channels for zones that will not have to repon these

conditions.

ADBMCO’s VISTA XM SERIES TECHNXCAL REFERENCE MANUAL

WWW.DIYALARMFORUM.COM

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 158 159

Commentaires sur ces manuels

Pas de commentaire

ADEMCO 5130XM Manuel d'instructions Page 67

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité ADEMCO 5130XM