ADEMCO 4140XMPT2 Manuel d'utilisateur télécharger pdf (Page 3)

Page 3

2nd Page Programming Fields (press *94)

ASSIGN RESPONSE TYPE FOR ZONES

(Enter 00-10; see Response Types below)

1*01 1*02 1*03 1*04 1*05

28 | 33 | 41 | 49 | 57 |

29 | 34 | 42 | 50 | 58 |

30 | 35 | 43 | 51 | 59 |

31 | 36 | 44 | 52 | 60 |

32 | 37 | 45 | 53 | 61 |

38 | 46 | 54 | 62 |

39 | 47 | 55 | 63 |

40 | 48 | 56 | 64 |

1*06 1*07 1*08 1*09

65 | 73 | 81 | 88 | 2nd RCVR

66 | 74 | 82 | 89 | 2nd RCVR

67 | 75 | 83 | 90 | 1st RCVR

68 | 76 | 84 | 91 | 1st RCVR

69 | 77 | 85 |

70 | 78 | 86 |

71 | 79 | 87 |

72 | 80 |

RESPONSE TYPES: 00 = Disabled zone; 01 = Entry/Exit #1; 02 =

Entry/Exit #2; 03 = Perimeter; 04 = Interior Follower; 05 = Day/Night; 06 =

24 hour Silent Alarm; 07 = 24 hour Audible Alarm; 08 = 24 hour Auxiliary;

09 = Fire;

10 = Interior, Delay; 20=arm stay; 21=arm away; 22=disarm; 23=no alarm

response

NOTES: Use of 1 or 2 RF RCVRs requires enabling their respective faults (88-

91) as troubles (type 5). Enter 00 if no annunciation is desired. 88 & 90 =

RCVR not receiving transmitter signals. 89 & 91 = RCVR not responding, bad

conn. to panel.

MISCELLANEOUS WIRELESS OPTIONS

1*26 FIRST 4280 RF RECEIVER SELECT

1=yes; [0=no]

1*27 SECOND 4280 RF RECEIVER SELECT

1=yes; [0=no]

1*28 RF TX LOW BATTERY ANNUN.

1=immediate; [0=when disarmed]; Must be "1" for UL

1*29 RF TX LOW BATTERY REPORT ENABLE

1=enable; [0=disable]

Must be "1" for UL

1*30 RF RCVR CHECK-IN INTERVAL |

02-15 times 2 hours; 00 disables supervision [06]

Max. "6" (12 hr) for UL

1*31 RF TRANSMITTER CHECK-IN INTERVAL |

02-15 times 2 hours; 00 disables transmitter supervision [12]

Max. "6" (12 hr) for UL

1*32 RF RECEIVER TYPE

0=4280; 1=4281 ( must have correct revision level); 2=5881

1*33 TOUCH-TONE W/ROTARY BACKUP ENABLE

1=enable; [0=disable]

1*34 COMM. SPLIT REPORT SELECTION

[0=no]; 1=alarms primary, others secondary;

2=open/close, test secondary, others primary; See *51 for

comments.

ALARM REPORT CODE & ID DIGITS FOR ZONES

65-80 & SUPV. & RESTORE CODES

[codes default to zero]

1*35 CODE 1*36 ID 1*37 CODE 1*38 ID 1*39

65 | | 73 | | | Alarm Rst.

66 | | 74 | | | Trouble

67 | | 75 | | | Trble Rst.

68 | | 76 | | | Bypass

69 | | 77 | | | Bypss Rst.

70 | | 78 | |

71 |

| 79 | |

72 |

| 80 | |

DIALER CODES ( Armed Stay, Time Set & Event Logging)

1*40 1*41

First Digit Second Digit

Armed STAY | |

Time/Date set or event log reset | |

Event log 50% & 90% full | |

Event log overflow | |

1*43 ENABLE PERM. BACKLIGHT

1*44 WIRELESS KEYPAD

TAMPER DETECT ENABLE 1=enable; [0=disable]

1*45 CONSOLE ANNUN. DURING EXIT DELAY

1*46 AUXILIARY OUTPUT ENABLE

[0=ground start]; 1=open/close trigger; 2=console sounding

1*47 CHIME ANNUN. ON EXT ALARM SOUNDER

1*48 WIRELESS KEYPAD ASSIGNMENT

[0=disable]; enter partition in which RF keypad used, 1-8.

1*49 DISABLE TROUBLE SOUNDER

FOR RF SUPERVISION [1=disable]; 0=enable. Must be "0" for

UL.

1*52 CANCEL REPORT RESTRICTION

1*53 DOWNLOAD CALLBACK

1=callback not required; [0=callback required]; Must be "0" for UL.

1*55 DATE FORMAT SELECTION

[0 = mmddyy]; 1 = ddmmyy

1*56 REAL TIME CLOCK SYNCH

[0 = 60Hz Mains]; 1 = 50Hz Mains

1*57 ENABLE 5800 RF BUTTON GLOBAL ARM

Enter "1" to have the system arm/disarm following the button';s

user's global arm settings. Enter "0" if the button is not to be used

to global arm the system.

1*58 ENABLE 5800 RF BUTTON FORCE BYPASS

If zone is faulted after pressing button, console will beep once.

User should press button again within 4 sec. to force bypass

those zones.

1*60 ALARM VERIFICATION

Enter 1 if alarm verification is being used; [Enter 0 if not used.]

1*66 SILENCE BELLS DURING ALARM VERIFICATION

Enter 1 if bells are to be silenced during alarm verification; [Enter

0 if not.]

1*67 VIDEO ALARM VERIFICATION SELECTION

Enter 1 for video alarm verification; [Enter 0 otherwise.]

1*70 EVENT LOG TYPES

1=enable logging; 0=disable Alrm Chck Byps O/C Systm

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

ADEMCO 4140XMPT2 Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité ADEMCO 4140XMPT2