ADEMCO 4110XM Guide de l'utilisateur télécharger pdf (Page 12)

Security Codes

(cont’d)

–

Assigning, Changing, or Deleting User Codes

4-DIGIT USER CODES

It is recommended that obvious codes

such as 1 1 1 1 or 1 2 3 4 not be

assigned.

1. Enter your Master code and press the CODE key.

2. Enter single-digit user number ('2', '3', '4', '5', '6' or '7') for which a code is to be

assigned, changed, or deleted.

3. If assigning or changing a user's code, enter the desired 4-digit code for use

by that user number. The keypad will beep once.

If deleting a user's code, perform steps 1 & 2 and stop. In a few moments the

keypad will beep once, indicating that the existing code has been deleted.

To assign your Duress code, perform the following:

Enter your [Master code] + [8] + [8] + [desired 4-digit code]. The keypad will

beep once.

The Master code can be changed by the main user of the system. To change it,

perform the following:

Enter your [Master code] + [8] + [1] + [new Master code] + [new Master code]

again. The keypad will beep once.

Important: Temporary users should not be shown how to use any system function

they do not need to know (e.g., bypassing protection zones).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Pas de commentaire

ADEMCO 4110XM Guide de l'utilisateur Page 12