ADEMCO AHDR4 Instructions d'exploitation Page 63

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 196
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 62
While configuring the keyboard, the COMMUNICATIONS / TELEMETRY submenu ( see § 4.2.3.2
-Telemetry , page 24), should be set as follows:
A-Connector
Telemetry
A-Protocol ENEO (*)
A-Baudrate 2400
B-Connector Telemetry
B-Protocol ENEO (*)
B-Baudrate 2400
(*) Any protocol present in the keyboard.
All telemetry commands will be sent directly to the keyboard connectors. Only video control commands are
sent to the matrix.
5.4.6.3 Mixed telemetry control (matrix/keyboard)
While configuring the keyboard, the COMMUNICATIONS / TELEMETRY submenu (see § 4.2.3.2
-Telemetry , page 24), should be set as follows:
A-Connector
Telemetry
A-Protocol ENEO (*)
A-Baudrate 2400
B-Connector Telemetry
B-Protocol -------------------
B-Baudrate -------------------
(*)Any protocol present in the keyboard.
In this case all telemetry A commands will be sent directly to keyboard A connector using the protocol
selected on the keyboard. All telemetry commands of cameras with settings on the B line will be sent to the
matrix which in turn will send them along the P&T line. The telemetry protocol is set in the video matrix.
T o set the cameras on line A or B (see § 4.2.4.1.1 - Cameras with a matrix connection, page 27).
Page 60 of 193 MNVADCT_0409
Vue de la page 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 195 196

Commentaires sur ces manuels

Pas de commentaire