ADEMCO Vista Guide de l'utilisateur télécharger pdf (Page 31)

– 31 –

TROUBLE CONDITIONS

Typical "Check"

Displays

The word CHECK on the Keypad's display, accompanied by a rapid "beeping" at the

Keypad, indicates that there is a trouble condition in the system. The displays in

parenthesis may appear on non-alpha keypads when the associated trouble condition

is present.

To silence the beeping sound for "check" conditions, press any key.

* Note that zone

number 9 repre-

sents a problem

with wireless re-

ceivers or other

system devices,

which are not user

serviceable. CALL

FOR SERVICE

IMMEDIATELY.

1. CHECK + Indicates that a problem exists with those zone(s)*. First, deter-

Zone mine if the zone(s) displayed are intact and make them so if they

Descriptors are not. If the zone uses a wireless detector, check that changes

in the room (moving furniture, televisions, etc.) are not blocking

wireless signals from the detector. If the problem has been cor-

rected, the zone descriptor(s) and CHECK should disappear. If not,

key an OFF sequence (security code plus OFF) to clear the dis-

play. A CHECK condition can also indicate a wiring problem. If the

"check" display persists, CALL FOR SERVICE IMMEDIATELY.

Note that the system will not allow arming if a CHECK condition

exists. To arm the system with a CHECK condition present, you

must first bypass the zone(s) having the CHECK condition.

2. Telco Fault

(or CHECK

and zone 94)

If the telephone line monitor feature has been programmed for your

system, this display indicates that the telephone line has been

disconnected or cut. In some systems, this display will be

accompanied by a trouble sound from the keypad and the external

sounder may be activated. CONTACT YOUR SERVICE

COMPANY IMMEDIATELY.

To silence the trouble sound, enter your security code plus OFF.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Pas de commentaire

ADEMCO Vista Guide de l'utilisateur Page 31